Ferris-industries ZMT 160 Manuel d'utilisateur télécharger pdf (Page 10)

ZMT Owner’s Manual

4. INSTRUCTIONS FOR INSTALLATION AND

HANDLING

4.1 Lifting and Unloading

To handle the shredder use a hoist or a crane

with lifting capability suitable to the weight of

the machine (see Table 1) and with proper

chains and type approved hooks attach them

to the marked points, as shown in Figure 6.

4.2 Packing

To make transport easier, the shredder can be supplied in a special pack

(disassembled and on pallets).

In this case, a card showing the reassembling procedure will be attached to the Use

and Maintenance Manual.

4.2.1 Instructions For Assembly

Instructions for the assembly of the mower when it is shipped partially dismounted

(Figure A).

In order to have the mower stable during the operations, hook the mower up to the shift

of the tractor.

• Switch off the tractor.

• Cut the fixing strings used for transport reasons.

• Bring the arm (1) and put it on the ground.

• Turn the arm (2) around as shown on Figure B.

• Put the arm (1) on the proper support (3) & (4) and lock with threaded pins (5).

• Fix the cylinder (6) (rod side) with threaded pin (7).

Figure 6

Figure A

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

Pas de commentaire

Ferris-industries ZMT 160 Manuel d'utilisateur Page 10